Auto Pan Setting - JVC TK-AM200U - Active Movement Color Dome Camera Instructions Manual

Changing Camera Settings Using the RM-P2580

AUTO PAN Setting

AUTO PAN is a function that automatically swings the camera horizontally in a panning
movement. Select this setting to observe the range between two points. (Set for each
camera.)
Slowly
S E T U P
C A M E R A MO D E
C A M E R A V I D E O
V I D E O A D J F O R
T E X T E D I T . .
A U T O P A T R O L
A U T O P A N S E T . .
P A N I C A L A RM S E T . .
F A C T O R Y S E T T I N G S . .
CAMERA SETUP screen
A U T O P A N
S T A R T P O S I T
R E T U R N P O S I T I O N
AUTO PAN SET screen
S T A R T P O S I T I O N
START POSITION SET screen
28
ZOOM
(TELE)
button
ZOOM
(WIDE)
button
S E L E C T . .
A D J U S T . .
P O S I . .
S E T . .
S E T
I O N S E T . .
S E T . .
S E T
MENU SET
button button
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
CAMERA CAMERA POSITION POSITION
SETUP SETUP
POWER WER
ALARM
MENU MENU SET AUTO AUTO F-1
KEY LOCK KEY LOCK
LENS CAMERA/POSITION PAN/TILT
1 2 3
CAMERA POSI- POSI-
SPEED
TION TION
IRIS 4 5 6 OPTION OPTION OPTION OPTION
CLOSE CLOSE OPEN OPEN
1 2
FOCUS
7 8 9 AUTO AUTO
NEAR NEAR FAR FAR
AF
PAN PATROL
0
WIDE WIDE ZOOM TELE CLEAR CLEAR ENTER ENTER
/HOME /HOME
RM-P2580
Use the CAMERA button
ENTER button to select the camera to
be set for auto pan.
1.
Select the AUTO PAN SET.. item on the
camera's SETUP screen, and then press
the SET button.
The AUTO PAN SET screen is dis-
played on the monitor.
2.
Use the PAN/TILT control lever to align
the cursor (>) with the START POSI-
TION SET. When the SET button is
pressed, the START POSITION SET
screen is displayed.
Adjust the angle of view at the start
position using the PAN/TILT control le-
ver and ZOOM button.
3.
When the MENU button is pressed,
"DATA SAVED" is displayed on the
screen for about 3 seconds before the
AUTO PAN SET screen returns.
The set angle of view at the start posi-
tion is saved.
RM-P2580
F-2 F-3
Numeric key
CAMERA button
PAN/TILT control lever
ENTER button
Numeric key