Auto Pan Setting - JVC VN-V686U Instructions Manual

Auto Pan Setting

This item sets the Auto Pan operation which moves at a certain speed from the configured [Start Position].
Click the [Auto Pan] tab on the [PTZ Controller] screen and configure settings at the [Auto Pan] setting
screen.
A
Click the [Position Memory] tab to display the
[Position Memory] screen.
B
Select [Position].
[Setting values:HOME, 0 to 99]
C
The current title appears.
Enter here to register or change the title.
(Up to 32 alphanumeric characters can be
entered. When Built-in JPEG Viewer is used, up
to 16 alphanumeric characters are displayed.)
D
Operate the camera and adjust the angle and
image quality of the position to be registered.
:
Memo
● For details on the adjustment method, see
[Operation] (A Page 106).
E
Click [Register] to complete registering the
position.
:
Memo
● Click [Delete] to delete information of the
selected position. However, [HOME] cannot
be deleted.
● The default home positions are Pan 1.00
degrees, Tilt 45 degrees, and Zoom 1x.
Return