Locking Of The Microphone - Danish Interpretation Systems DCS 6000 User Manual

Danish Interpretation Systems
Mini-DIN microphone connector (only "F"
models)
A Mini-DIN microphone connector is located at the
back for connection of FD/FC front plates with GM
65xx F series of gooseneck microphones. The HM
4042 Hand Microphone can also be connected.
This connecter is intended for use, where the
connection to the microphone is remotely from the
front plate, which is only on customised units.
HD 15S connector (only MU 604x models)
The HD 15S is used for direct remote connection of
FD/FC series of front plates or Microphones (e.g.
HM 4042 or GM 652x in external outlet) or/and
microphone control buttons, LED indicators and
loudspeaker. Please refer to the technical section for
pin layout
Important: The microphone input at the above
mentioned connectors
microphones and do not support other types of
microphones i.e. third part microphones.

Locking of the Microphone

The following units features locking of the
microphone using a tool
When locked, the microphone cannot be removed
from the unit
FD 61x0, FC 60x0 Front Plates
Locking – Turn clockwise
Un-locking – Turn counter clockwise
DC 6990P, DC 61x0P og DM 6680P:
Locking – Turn counter clockwise
Un-locking – Turn clockwise
28
does only support
:
DIS
Manual 01 18 04467
User Manual