Security - Tripp Lite NetCommander B070-016-19-IP Owner's Manual

16. Security

The Security Settings Screen allows the Administrator to modify settings
such as Account Blocking, Password Policy and Idle Timeout.
Account Blocking: This allows the administrator to adjust the settings that
cause a user to be blocked from access after entering an incorrect username
and/or password. The administrator can select how many attempts the user
gets to enter the correct information, the time frame within which those
attempts must be made and how long the user is forbidden access after failing
to enter the correct information in the given time period.
Password Policy: You have the option of a standard or high security level
password. The table below shows the parameters of the 2 options.
Standard Security Policy High Security Policy
8 characters or more must include at least 1 digit
6 characters or more. Cannot and 1 upper case letter and 1 "special" character as
include the user name. follows ! @ # $ % ^ * ( ) _ - + = [ ] ' : ; ? / . Cannot
include the username.
Note: The following "special" characters: & < > " { } cannot be used
in either the user name or password. Check the box to enable the high
security password policy. Unchecked, the standard security policy applies.
Idle Timeout: Select the Timeout inactivity period after which the user is
disconnected from the system. Choose No Timeout to disable Timeout. During
a Timeout, a user will not be able to make changes in the Web Configuration
Interface, nor will they be able to move throughout the Interface's pages
without re-entering their username and password.
Click Save & Restart to save any configuration changes done to the Security
Settings page. The NetCommander IP system restarts with the new changes.
201204110 93-2924.indd 12
12
8/2/2012 10:15:55 AM