Table of Contents
Advertisement
THEMENU
i
1SY'STEM
RECEIVE
(RX)
SETUP
Menu Item
Sub-item
1. ECM RX
Descl'iption
Turn Error Correction Mode (ECM)
receiving on or off.
Options
ON*, OFF
Commands
ON: Receiving is done in error
correction mode.
OFF: Receiving is done without error
corrrection.
2. RXMODE
Set how the fax handles incoming calls.
AUTO FAX RX*,
AUTO FAX RX: Treats all calls as faxes.
FAXITEL AUTO SW FAXITEL AUTO SW: Switches between
fax/phone receiving automatically.
If you select FAXITEL AUTO SW, You can also set items 1. to 3. below:
1. RING START
Set how long the fax waits before
00-30 SEC (08*)
TIME
switching from FAX to TEL and begins
ringing when receiving a phone call.
Set the time the fax takes to check
whether a call is from a fax machine or
a telephone.
2. FIT RING TIME Set how long the fax rings when it receives
a phone call.
10-45 SEC (15*)
Set the number of times the fax rings.
3. FIT SWITCH
ACTION
3. FAX INCOMING
RING
Set the response when no one lifts the
handset within the specified time in
2.
FIT
RING TIME.
Set whether the fax rings when it receives
a fax.
RECEIVE*,
DISCONNECT
ON,OFF*
RECEIVE: The fax switches to receive
mode.
DISCONNECT: The fax disconnects the
call.
ON: The fax rings when it receives a
fax if the optional handset or a
telephone is connected.
OFF: The fax does not ring when it
receives a fax.
RING COUNT Set how many times the fax rings when it
receives a fax.
01-99 TIMES (02*)
4. ANS/FAX SWITCH
ANS/FAX
SWTIME
Set whether the fax switches to automatic
fax receive mode when the caller does not
talk.
Set how long the fax waits before
switching to automatic fax receiving mode
when the caller does not talk.
ON*, OFF
ON: The fax switches to automatic fax
receive mode when the answering
machine is turned on.
OFF: The fax does not switch when the
caller does no talk.
01-99 SEC (06*)
Set a time from 01 to 99 seconds.
FIT RING TIME Set how long the fax rings before
switching to document receiving.
5. MAN/AUTO
SWITCH
6. REMOTE RX
REMOTE RX
ID
Set whether the fax switches from manual
receive mode to document receive mode
after ringing fora set time.
Set whether remote receiving is on or off.
Lets you change the remote receiving ID
(lD CALL #).
ON,OFF*
01-99 SEC (10*)
ON*, OFF
00-99 (25*)
ON: The fax switches to document
receive mode after ringing for a set
time.
OFF: In manual receive mode, the fax
does not switch to document receive
mode.
Set a time from 01 to 99 seconds.
With ID # remote receiving ON, you
can dial a number code on a remote
extension to receive a fax.
Enter a new ID from 00 to 99.
7. MEMORYRX
8. AX PAGE FOOTER
The Menu System
Set whether the fax stores the remainder of
an incoming fax in memory if paper runs
out during reception.
Sets the fax to print the time a document is
received, the transaction number, page
numbers, and other useful information.
ON*, OFF
ON,OFF*
ON: The fax stores the remainder of
the fax if paper runs out.
OFF: The fax does not store the
remainder of the fax if paper runs out.
OFF: Prints no footer information.
ON: Prints footer information.
*: Default
A-9
Advertisement
Table of Contents
