Table of Contents
Advertisement
SPEED
DIALING
Using ,One-Touch Speed
Dial.ing
1
Place the document face down on the fax, and gently insert it into the
automatic document feeder (ADF) until it stops.
2
Press the desired One-Touch Speed Dialing button.
Here are some important points about One-Touch Speed Dialing:
•
If you make a mistake, or want to cancel the dialing, press STOP.
•
You can select up to 20 One-Touch Speed Dial buttons and also
include Coded Speed Dial codes (00-99). The fax will automatically
be sent in numerical order to the Coded Speed Dial numbers first,
then to the One-Touch Speed Dial numbers.
•
After you press a One-Touch Speed Dialing button, the fax will
start scanning in five seconds, even if you don't press START/COPY
(ten seconds if you press more than one One-Touch Speed Dialing
button). So if you want to send to multiple destinations, be sure to
press the second One-Touch Speed Dialing button within five
seconds after pressing the first, and press any subsequent buttons
within ten seconds.
•
If you don't first place the document into the automatic document
feeder (ADF), the fax will display SET DOCUMENT.
•
If no number is stored under the button you press, the fax will
display NO TEL
#.
5-4
Note
When using One-Touch Speed Dialing, make sure the
FUNCTION
lamp
is off.
Canon CFX-L4000 User's Guide
Advertisement
Table of Contents
