Table of Contents
Advertisement
PROBLEMS-AND SOLUTIONS
Problems
Receiving'Faxe,.:
8-10
The recordi ...g paper jams frequently
•
Make sure the recording paper and the paper cassette are
properly set as described on page 2-22.
The fax doesn't automatically switch between phone and fax transmissions
•
Make surethe
ANS HOOK UP
and
MANUAL
lamps are off. If neces-
sary, press the button below them repeatedly until both are off.
•
Make sure the receiving mode is set to FAxrrEL AUTO SW.
See page A-8 for details on setting.
The
fa~
won't receive,faxes automatically
•
Make sure you have printed out or deleted any documents in
the fax's memory.
•
Make sure the fax is set to receive automatically: press the
button below the
ANS HOOK UP
and
MANUAL
lamps repeatedly
until both lamps are off.
•
Make sure the paper cassette has paper in it.
•
Check the display for an error message.
(~p.
8-14)
•
Make sure all phone line connections are secure.
(~
p. 2-13)
•
Print an activity report and check for an error code.
(~
p. 6-2)
•
Make sure the receiving mode is set to AUTO FAX RX.
The fax won't receive faxes manually
(Optional handset or extension phone connected to the fax machine)
•
You may have pressed START/COPY after hanging up the hand-
set; When receiving a fax manually, you must hang up the
handset after pressing START/COPY.
•
Check the display for an error message.
(~
p. 8-14)
•
Print an activity report and check for an error code.
(~
p. 6-2)
The fax won't receive using ECM
•
Make sure the fax is set for ECM receiving.
(~
p. A-8)
•
Make sure the sender's fax, machine supports ECM. If it doesn't,
the fax is sent in normal mode without error checking.
Errors frequently occur during receiving
•
Lower the speed at which the unit receives faxes in the RX
START SPEED setting of the SYSTEM SETTINGS -(14400 bps to
9600 bps for example).
(~
p. A-13)
If the faxes you receive don't print out properly, see "Problems
Printing," below.
Canon CFX-L4000 User's Guide
Advertisement
Table of Contents
