Dispensing Hot Milk With The Professional Cappuccino Frother - Jura IMPRESSA F50 Classic Instructions For Use Manual

Dispensing Hot Milk with
the Professional
Cappuccino Frother
E If you do not change the steam dispensing time with the
Rotary Switch (1), the machine will set the steam quantity
according to the previously used settings.
E Adjust the steam dispensing time to suit the size of your cup.
While drawing off steam,
Once the desired steam quantity has been reached,
is shown on the display.
TAP
T Close the steam/hot water selector (14).
/
STEAM READY
E At any time, you can stop dispensing steam at an earlier stage
by closing the tap for dispensing steam/hot water (14).
E As long as /
STEAM
machine is ready to dispense steam.
E Due to the system design, steam can still escape and some
milk may continue to drip before the tap is closed.
T Now, move your cup with the milk foam under the coffee
spout and draw off the desired coffee product (Fig. 8).
Your Cappuccino is ready.
E To ensure that the Professional Cappuccino Frother (15) works
perfectly, you should rinse it with water whenever you have
prepared some milk.
E Turn the selector lever on the Professional Cappuccino Frother
to the Milk position (Fig. 20). The procedure for dispensing hot
milk is the same as the procedure for dispensing milk foam for
Cappuccino (see section 2 "Preparation – Dispensing Cappuc-
cino with the Professional Cappuccino Frother").
E To ensure that the Professional Cappuccino Frother (15) works
perfectly, you should rinse it with water whenever you have
prepared some milk.
is shown on the display.
STEAM
is on view in the display, the
READY
2 Preparation
CLOSE
es
en
fr
es
ru
21