Brick Installation - Quadra-Fire COLBAY-INS Owner's Manual

I. Brick Installation
Install baffle: Bring the front edge of the baffle up and
forward until the baffle rests on the baffle supports, as
shown.
SUPPORTS SUPPORTS
BAFFLE BAFFLE
Figure 12.10
Lift the baffle slightly and install the rear brick panel. Rest
baffle on rear brick panel.
REAR BRICK PANEL REAR BRICK PANEL
Figure 12.11
Install right brick panel.
BRICK CLIPS BRICK CLIPS
Figure 12.12
32
BAFFLE BAFFLE
BAFFLE BAFFLE
Quadra-Fire • COLBAY-INS • 7002-109 Rev. N • 8/10
Rest bottom of panel on shelf and push top into position.
Hold in place by bending brick clips over along front edge
of brick.
Figure 12.13
Install left brick panel in the same way by pushing in the
top and securing by bending clips at top and bottom.
BRICK CLIP BRICK CLIP
Figure 12.14
Figure 12.15 Finished Brick Installation