Positioning The Logs - Quadra-Fire COLBAY-INS Owner's Manual

J. Positioning the Logs
While still breakable, the logs do not become fragile until
after the appliance is burned and they have cured. After
curing, any handling must be done with care as breakage
can easily occur.
Note: Logs have been designed to work specifi cally with the
burner of this appliance. Exact placement will ensure proper
operation of your gas appliance and reduce sooting.
Complete log installation.
5 5
2 2
Figure 12.16
After installing brick, install rear log (#1) over locating pins
on log shelf, as shown.
Note: Locator pins are included in the log component
package.
Figure 12.17
Install cover for refractory supports on left and right sides.
Left side
Figure 12.18
1 1
4 4
3 3
Right side
Quadra-Fire • COLBAY-INS • 7002-109 Rev. N • 8/10
Install left log (#2) over locating pins on burner.
Figure 12.19
Install right log (#3) in empty space on burner.
Figure 12.20
Install "S" shaped log (#4) on pins on right and rear logs.
Figure 12.21
Install left twig (#5) on pin in left log resting just under "S"
shaped log.
Figure 12.22
33