Installation of the brick set should be made prior to the logset, nugget and lava
rock installation.
Kits includes: 1 Rear brick, 1 Right Brick, 1 Left Brick and 2 Brick clips.
1. Place rear brick behind log rack against rear wall of firebox as shown in Fig. 1.
FIG. 1
.
2. Remove mounting screws from the upper right and left sides of firebox, see Figure
4 for location of mounting screw, and gently slide the right and left side brick panels
into place as shown in Figures 2 and 3.
FIG. 2
Page 48
REMINGTON QFP40 Direct Vent FIREPLACE
BRICK INSTALLATION
Optional Accessory Part # 841-0740
NOTE:
BRICK IS FRAGILE. HANDLE WITH CARE.
250-4721 JUNE 2001