Toyota Sienna 2007 Operating Manual page 92

07 SIENNA_U (L/O 0612)
When returning the tumbled second
seat to its original position:
Once the seat is moved from
tumbled position to the folded−down
position, it cannot be directly returned
to the tumbled position again. (It is im-
possible to operate the seat in the or-
der 1 2 1.) When you return
folded−down seat (position 2) to its
tumbled position (position 1), you must
return the folded−down seat (position 2)
to its original position (position 3)
once. (It is possible to operate the seat
in the order 1 2 3 1.)
CAUTION
the
When reinstalling the seat, observe
the following to prevent death or seri-
ous injury:
D
Do not reinstall the seat while the
vehicle is moving.
the
D
Be careful not to get your hands or
feet pinched in the seat.
D
Be careful not to hit the removed
seat against a person or drop it on
yourself.
D
After folding or installing the seat,
push it forward and backward to
make sure it is locked in position.
When reinstalling seats to their origi-
nal position, observe the following
precautions in order to prevent death
or serious injury in a collision or
sudden stop:
D
Make sure the seat
locked by pushing forward and rear-
ward on the top of the seatback or
by trying to pull up the edge of the
bottom cushion. Failure to do so
will prevent the seat belt from oper-
ating properly.
2007 SIENNA from Oct. '06 Prod. (OM45437U)
is securely
83