Toyota Sienna 2007 Operating Manual page 239

TURNING THE SYSTEM ON AND OFF
To turn the dynamic laser cruise control
on, turn the "ON−OFF" button on. The
"CRUISE" and "READY" indicator lights on
the instrument panel will come on to indi-
cate that the vehicle−to−vehicle distance
control mode is operational. Pressing the
"ON−OFF" button again turns the system
off.
When the system is turned off, cruising
speed and vehicle−to−vehicle
must be reset when the vehicle−to−vehicle
distance control mode is turned on again.
When the ignition is turned off, the system
is also automatically turned off. To use
dynamic laser cruise control again, press
the "ON−OFF" button again to turn it on.
230
When the ignition is turned off, all the
preset data is cleared. When you use the
dynamic laser cruise control again, you
need to reset the data.
CAUTION
To avoid accidentally engaging the
cruise control, turn the system off
when it is not in use. Make sure the
"CRUISE" indicator light is off.
distance
07 SIENNA_U (L/O 0612)
SETTING THE CRUISING SPEED
The transmission must be in "D" or "4"
before you set the cruising speed.
Bring your vehicle to the desired speed,
push the lever down in the "− SET" direc-
tion and release it. This sets the vehicle
at that speed. At this time, the display
indicates settings such as the preset ve-
hicle speed, whether a vehicle is present
ahead and selected vehicle−to−vehicle dis-
tance. If there is no vehicle detected
ahead, the display does not indicate the
vehicle ahead. You can now take your foot
off the accelerator pedal.
2007 SIENNA from Oct. '06 Prod. (OM45437U)