Sliding Doors - Toyota Sienna 2007 Operating Manual

AUTOMATIC DOOR UNLOCKING
You can select the following functions:
D
Unlocking linked with the shift posi-
tion
All doors are automatically unlocked
when the selector lever is moved to
"P" position.
D
Unlocking linked with the ignition
switch
All doors are automatically unlocked
when the driver's door is opened within
10 seconds after the ignition key is
turned to the "ACC" or "LOCK" posi-
tion, or the key is removed.
You can set or cancel the automatic
door unlocking functions:
Be sure to apply the parking brake when
performing the following operations.
To select the unlocking linked with the
shift position:
1. Close all doors and turn the ignition
key to the "ON" position.
2. Shift the selector lever to the "P" posi-
tion.
07 SIENNA_U (L/O 0612)
3. Within 10 seconds of turning the igni-
tion key to the "ON" position, press
and hold the driver's side power door
lock switch in the unlock position for
5 seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
To select the unlocking linked with the
ignition switch:
1. Close all doors and turn the ignition
key to the "ON" position.
2. Shift the selector lever from "P" to the
"N" position.
3. Within 10 seconds of turning the igni-
tion key to the "ON" position, press
and hold the driver's side power door
lock switch in the unlock position for
5 seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
Sliding doors (non−powered)
LOCKING AND UNLOCKING
INSIDE LOCK KNOB
Move the lock knob.
To lock: Move the knob forward.
To unlock: Move the knob backward.
Closing the sliding door with the lock knob
in the lock position will also lock the slid-
ing door. Be careful not to lock your keys
in the vehicle.
2007 SIENNA from Oct. '06 Prod. (OM45437U)
WITH
25