Toyota Sienna 2007 Operating Manual page 240

Hide thumbs Also See for Sienna 2007:
Table of Contents

Advertisement

If you need to accelerate—for example,
when
passing—depress
the
accelerator
pedal enough for the vehicle to exceed
the preset speed. When you release the
accelerator pedal, the vehicle will return to
the control prior to acceleration.
You cannot set a desired speed if the
master warning light comes on, the alarm
sounds and the display indicates one of
the warning codes "E1", "E2" or "E3". If
any of the above codes appears on the
display,
see
"VEHICLE−TO−VEHICLE
DISTANCE
CONTROL
MODE
FAILURE
WARNING" on page 235.
CANCELLING
VEHICLE−TO−VEHICLE
DISTANCE
CONTROL MODE
The
vehicle−to−vehicle
distance
mode may be temporarily cancelled by the
driver or by the system itself under cer-
tain circumstances. Temporary cancellation
allows the set cruising speed and vehicle−
to−vehicle distance to remain in memory.
The
vehicle−to−vehicle
distance
mode can be temporarily cancelled by do-
ing the following:
D
Pulling the lever in the "CANCEL" di-
rection and releasing it
D
Depressing the brake pedal
Under certain circumstances, the vehicle−
to−vehicle distance control mode is tempo-
rarily cancelled:
D
When vehicle speed falls below 40
km/h (25 mph)
D
When vehicle stability control is acti-
vated
The "READY" indicator light comes on to
indicate that the system is still in opera-
tion.
To turn the system off, press the "ON−
OFF" button. Make sure the "CRUISE" in-
dicator light is off.
THE
If one of the warning codes "E1", "E2" or
"E3" appears on the display, the preset
speed
automatically
cancels
"VEHICLE−TO−VEHICLE
control
CONTROL MODE FAILURE WARNING" on
page 235.
If the vehicle−to−vehicle distance control
mode automatically cancels out other than
for the above cases, have your vehicle
checked by your Toyota dealer at the ear-
control
liest opportunity.
07 SIENNA_U (L/O 0612)
RESUMING THE VEHICLE−TO−VEHICLE
DISTANCE CONTROL MODE
If the vehicle−to−vehicle distance control
mode is temporarily cancelled, the cruising
speed and vehicle−to−vehicle distance can
be resumed by pushing the lever up in the
"+ RES" direction.
Vehicle speed must be above 40 km/h (25
mph).
During follow−up cruising, if there are no
vehicles
ahead
changed lanes, your vehicle will accelerate
gradually up to the preset speed. At this
time, pushing the lever up in the "+ RES"
direction will quickly speed up your ve-
hicle in vehicle−to−vehicle distance control
out.
See
mode.
DISTANCE
2007 SIENNA from Oct. '06 Prod. (OM45437U)
because
they
have
231

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents