Toyota Sienna 2007 Operating Manual page 183

Headlights and turn signals
(with automatic light control
system)
For the U.S.A.
For Canada
174
07 SIENNA_U (L/O 0612)
HEADLIGHTS
To turn on the following lights: Twist
the headlight/turn signal lever knob.
Position 1—Parking, tail, license plate,
side marker and instrument panel lights
On some models—
For Canada—The tail light indicator lights
up in the instrument cluster.
Position 2—Headlights and all
above
On some models—
For the U.S.A.—The headlight indicator
lights up in the instrument cluster.
Position 3 ("AUTO")—Headlights and/or all
of the lights in position 1
They automatically turn on or off depend-
ing on the darkness of the surroundings.
Manually twist the knob to the position 2
to turn on the headlights if they are need-
ed immediately when entering a dark tun-
nel, parking structure, etc.
of the
The automatic light control sensor is on
the top of the driver's side instrument
panel.
Do not place anything on the instrument
panel, and/or do not affix anything on the
windshield to block this sensor.
If you feel that the automatic light control
comes into operation too early or too late,
have the sensor adjusted by your Toyota
dealer.
Automatic light cut off system
Position 1 or position 3 with the tail
lights on—
The lights automatically turn off when the
driver's door is opened with the ignition
key in the "ACC" or "LOCK" position.
2007 SIENNA from Oct. '06 Prod. (OM45437U)