Toyota Sienna 2007 Operating Manual page 352

(c) Erasing the entire HomeLink
memory (all three programs)
To erase all previously programmed codes
at one time, press and hold down the 2
outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase
the programs stored in the HomeLink
memory.
07 SIENNA_U (L/O 0612)
For additional programming assistance
R
with your HomeLink
Transceiver call the:
A
Toyota Customer Experience Center at
1−800−331−4331 (U.S.A.)
A
Toyota Canada Customer
Centre at 1−888−869−6828 (Canada)
R
Refer to HomeLink on the internet at:
WWW.HOMELINK.COM
R
R
CAUTION
Universal
A
When programming the HomeLink
Universal Transceiver, you may be
operating a garage door or other
Interaction
device. Make sure people and ob-
jects are out of the way of the ga-
rage door or other device to pre-
vent potential harm or damage.
A
Do not use this HomeLink
sal Transceiver
door opener that lacks the safety
stop and reverse feature as re-
quired by federal safety standards.
(This includes
opener model manufactured before
April 1, 1982.) A garage door open-
er which cannot detect an object
(signaling the door to stop and re-
verse), does not meet current feder-
al safety standards. Using a garage
door opener without these features
increases risk of serious injury or
death.
2007 SIENNA from Oct. '06 Prod. (OM45437U)
R
R
Univer-
with any garage
any garage door
343