Toyota Sienna 2007 Operating Manual page 312

CHANGING THE INITIAL SETTING (video
CD only)
Select the "Set Up" switch on the screen
and then the initial setting screen will ap-
pear. You can also display the screen by
pushing the "SET UP" button on the re-
mote control. You can change the initial
setting. (See "CHANGING THE INITIAL
SETTING" on page 293 in this Section for
details.)
After the setting is done, the player plays
from the beginning of the chapter or the
track.
07 SIENNA_U (L/O 0612)
CD Text
CD MP3
USING THE CONTROL SCREEN
When playing a disc, push the "DVD" but-
ton on the remote control. The control
screen will appear on the screen.
CD text only—
The disc title and track title will appear on
the screen when pushing the "DVD" button
on the remote control/DVD player unit.
Details of the specific switches, controls
and features are described below.
1. "RPT" switch (audio CD and CD text)
Select the "RPT" switch while the track
is playing. When the track ends, it will
automatically replay. To turn off the re-
peat feature, select this switch again.
2. "RAND" switch (audio CD and CD text)
Select the "RAND" switch. The player
will play the tracks on the disc in ran-
dom order. To turn off the random fea-
ture, select this switch again.
3. "SCAN" switch (audio CD and CD text)
Select the "SCAN" switch. The player
will scan all the tracks on the disc. To
stop scanning, select this switch again.
When the player has scanned all the
tracks on the disc, it will stop scan-
ning.
2007 SIENNA from Oct. '06 Prod. (OM45437U)
303