Toyota Sienna 2007 Operating Manual page 285

Replace the battery according to the fol-
lowing procedure:
1. Remove the cover of the remote con-
trol as shown.
276
07 SIENNA_U (L/O 0612)
2. Remove the discharged batteries and
put in the new batteries as shown.
Install the cover.
NOTICE
z Be sure that the positive side and
negative side of the remote control
battery should be faced correctly.
z Do not replace the battery with wet
hands. Water may cause rust.
z Do not touch or move any compo-
nents inside of the remote control,
or it may interfere with proper op-
eration.
z Be careful not to bend the electrode
of the battery insertion.
z Close the battery case securely.
After replacing the battery, check that the
remote control operates properly. If the
remote control still does not operate prop-
erly, contact your Toyota dealer.
2007 SIENNA from Oct. '06 Prod. (OM45437U)