2 The SpeedTouch™610 Web Interface
2.7. Advanced Tasks Links
CLI
Clicking this button pops up a new web browser page with the SpeedTouch™610 Web
based Command Line Interface (CLI):
The CLI is meant for in depth configuration of the SpeedTouch™610, giving full control
on all configurational aspects of the device.
The web based CLI provides the same functionality as the native Command Line Inter-
face, available through a Telnet session to the SpeedTouch™610, or via the serial
Console interface.
All CLI groups and commands are placed in a menu. You can open a group by clicking
the
mark next to a group name, or clicking the group name.
Clicking on a command name will execute it. Commands without parameters are indi-
cated with
and are executed immediately. Commands which require additional
parameters are indicated with
. After you configured all parameters, simply click
Apply to execute the command.
For more information, see section
"3.1. Native Command Line Interface Access" on
page
46.
Note: To access the web based CLI pages, you need at least Microsoft's Internet
Explorer 4.0, or at least Netscape's Communicator 4.06, or equivalent, both supporting
Javascript.
3EC 37770 AAAA TCZZA Ed. 02
43