Alcatel SpeedTouch 610 Orientation Manual page 19

3EC 37770 AAAA TCZZA Ed. 02
Step
The following window invites you to select the appropriate connection profile
2
for your Internet connectivity:
Select the connection profile and click Next to continue.
Note: In case the Service Provider included a separate disk with a dedicated
connection profile, click Have Disk to navigate to the location of the appro-
priate connection profile file.
Subsequent screens will guide you through the configuration setup of both the
3
SpeedTouch610 and/or your PC. Follow the instructions and enter the
required information where needed. This information should be provided by
your Service Provider.
Click Next each time to continue.
After configuring the SpeedTouch610 it will restart. In some cases your PC
4
must be restarted as well for the changes to take effect:
At reboot of your PC the wizard will automatically pop up once more to
5
announce that the configuration procedure has been successfully completed.
Click Finish to close the wizard.
If multiple PCs on your local network need to be configured to enable access
6
to the SpeedTouch610 you can either:
•
Re-run the SpeedTouch Setup wizard on every PC
Or, if applicable:
•
Enable automatic IP address configuration (DHCP client) on every PC.
1 SpeedTouch™610 Installation
Action
15