1 SpeedTouch™610 Installation
Front panel LEDs
Ethernet port(s) LEDs
6
The SpeedTouch™610 is equipped with 5 LEDs on its front panel, indicating the state of
the device during normal operation:
Indicator
Name
Color
LAN
Green
Line TX
Green
Line RX
Green
Line Sync
Green
PWR/Alarm
Green
The back panel contains the following:
•
The DC power inlet and power switch
•
One or four 10/100Base-T Ethernet port(s)
•
Optionally, the 25.6Mb/s ATM-Forum port
•
Reset DIP switches
•
Serial Console port
•
The DSL Line port.
Each Ethernet port on the rear panel has two LEDs:
10MB/100MB LED
Indicator
Name
Color
10MB/100MB
Green
Integrity
Green
Activity
Description
State
Flashing
Ethernet LAN activity.
Off
No Ethernet LAN activity.
Flashing
ATM cell transmission on DSL line.
Off
No transmission activity.
Flashing
ATM cell reception on DSL line.
Off
No reception activity.
Flashing
Initialization of DSL line.
On
DSL line synchronized.
On
Power on, normal operation.
Link Integrity/Activity LED
10/100Base -T
Description
State
Off
10Base-T Ethernet connectivity
On
100Base-T Ethernet connectivity
Off
No connection on this port.
On
Ethernet link up. No activity.
Flashing(*)
Activity on this Ethernet port.
3EC 37770 AAAA TCZZA Ed. 02