RIP
3EC 37770 AAAA TCZZA Ed. 02
For more information, see the application note "SpeedTouch™610 LAN Management".
Clicking this button pops up the Routing Information Protocol (RIP) page.
This page allows to:
•
Overview or configure the SpeedTouch™610's general RIP configuration:
Via the RIP Settings tab you can enable/disable the master RIP daemon and specify
which RIP version should be used. Additionally you can set the default metric and
some RIP timer settings.
•
Overview or configure the RIP configuration per interface:
Per interface you can:
•
Override the master RIP status (enable/disable)
•
Override the master RIP version, separately for receiving and sending RIP
messages
•
Specify whether authorization is needed or not, and if so the required autho-
rization string
•
Specify whether the scope of RIP on this interface should be narrowed to
the applicable IP range.
2 The SpeedTouch™610 Web Interface
27