Table of Contents
Advertisement
2 The SpeedTouch™610 Web Interface
System Setup
24
Clicking this button pops up the System Setup page.
This page allows to:
•
Configure a System password to restrict access to the SpeedTouch™610:
It is highly advised to configure a System password. To protect the Speed-
Touch™610 you should change the System password on a regular basis. However,
never use an obvious password as your name, birth date, etc.
Enter the System password of your choice and re-enter it in the appropriate fields.
Click Apply to apply the System password and Save All to save your changes to
persistent memory.
Note: As long as no System password is supplied, a warning is displayed on the
SpeedTouch™610 web pages.
•
Reset the SpeedTouch™610 configuration to its default settings (IP configuration
is maintained):
Click Defaults to initiate a reset of the complete configuration. A warning will be
displayed, asking for configuration of the reset. Click OK if you are sure. Other-
wise click Cancel.
Note: After reset, all original configurations of the SpeedTouch™610 are
restored, except the SpeedTouch™610 IP Ethernet IP settings.
For more information regarding the SpeedTouch™610 security features, default
settings, and configuration update, see the application note "SpeedTouch™610 Opera-
tion and Maintenance".
3EC 37770 AAAA TCZZA Ed. 02
Advertisement
Table of Contents
