1 SpeedTouch™610 Installation
Powering
POST phases
10
Once all previous steps are completed, you can turn the SpeedTouch
the power switch.
As soon your SpeedTouch610 is turned on, you can check the "PWR/Alarm" LED to
see how the Power On Self Test (POST) progresses.
Phase
"PWR/Alarm" LED Indication
1
Flashing red
2
Solid red
Solid green
610 on (I) with
Description
POST pending
Start-up failed
POST failed
Normal operation
3EC 37770 AAAA TCZZA Ed. 02