2 The SpeedTouch™610 Web Interface
PPP
32
Clicking this button pops up the Routed Point-to-Point Protocol (PPP) page. This page
is used to configure both the SpeedTouch™610 Routed PPP over ATM (PPPoA) and
Routed PPP over Ethernet (PPPoE) Packet Services.
This page allows to:
•
Overview/configure the SpeedTouch™610 Routed PPPoE and Routed PPPoE
Connection entries:
Per selected Routed PPPoA or Routed PPPoE connection entry, you can:
•
If applicable, configure the service name and access concentrator in case of a
Routed PPPoE connection entry:
•
If applicable, configure the Routing parameters :
•
If applicable, configure some advanced settings:
3EC 37770 AAAA TCZZA Ed. 02