Barco Coronis MDCC 2121 Getting Started Manual page 21

sured field strength in the location in which the B
used exceeds the applicable RF compliance level above, the B
Display should be observed to verify normal operation. If abnormal perfor-
mance is observed, additional measures may be necessary, such as re-ori-
enting or relocating the B
Over the frequency range 150 kHz to 80 MHz, field strengths should be less
b
than 3 V/m.
At 80 MHz and 800 MHz, the higher frequency range applies.
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Recommended separation distance
The B C
ARCO ORONIS
environment in which radiated RF disturbances are controlled. The
customer of the user of the B
electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment
(transmitters) and the B
according to the maximum output power of the communications
equipment.
Rated Separation distance according to frequency of transmitter
maximum
150kHz to 80MHz
output power
of transmitter
W
d 
0.01 0.12
0.1 0.38
1 1.2
10 3.8
100 12
C
ARCO ORONIS
Display is intended for use in an electromagnetic
C
ARCO
C
ARCO ORONIS
80MHz to 800MHz
d 
1 2 . P
0.12
0.38
1.2
3.8
12
C
ARCO ORONIS
Display.
Display can help prevent
ORONIS
Display as recommended below,
1 2 . P
EMC notice
Display is
C
ARCO ORONIS
800MHz to 2.5GHz
d 
2 3 . P
0.23
0.73
2.3
7.3
23
21