GE Security CONCORD User Manual page 47

Paging
For what events will the central station or pagers be
notified?
CS CS
Reporting 1 2
Features
High
Level
Reports
Low Level
Reports
Opening/
Closing
Reports
Latchkey N/A N/A N/A
Reports
Exception
Reports
Stream- N/A N/A N/A
lining
Partition N/A N/A N/A
Lights
The housecode for the X-10 modules is:
Partition 1: __________
Partition 2: __________
Record the location of each light.
Light Parti- Location of Light
tion
1 1 / 2
2 1 / 2
3 1 / 2
4 1 / 2
5 1 / 2
6 1 / 2
7 1 / 2
8 1 / 2
9 1 / 2
Pagers
CS
3
1 2 3 4 5
Wireless Interior Sirens
The housecode for the
wireless interior sirens is: _____.
Siren Location
Sensor No. of Siren
1
2
3
4
5
6
Is the wireless interior siren supervised?

Yes. I'll get a "Sensor nn OK" message on
alphanumeric touchpads when I test it.

No. No touchpad message will appear.
Energy Saver
The low setpoint is currently set for _____ degrees.
The high setpoint is currently set for _____ degrees.
If the Power Goes Out
Your system has a backup battery that keeps your
system operational during a power failure. An
optional feature allows your system to alert the cen-
tral monitoring station if the power is off for more
than 15 minutes. It reports again when power has
been restored.
Simply press the arm button to arm the system.
Press the disarm button to disarm the system.
(Pressing both at the same time sends a panic signal
to the central monitoring station.)
Resetting Smoke Detectors
After an alarm, wireless smoke detectors automati-
cally reset themselves after all smoke has cleared.
43
Super-
vised
Yes/No
Yes/No
Yes/No
Yes/No
Yes/No
Yes/No