Using The Chime Feature; Adjusting The Volume Of The Wireless Siren; Adjusting The Touchpad Display Brightness - GE Security CONCORD User Manual

2
3. Enter to turn the feature on,
preventing system status beeps
while arming; or, enter
turn the feature off, allowing system arming
beeps from touchpads and speakers.
ƒ
4. Press to secure your choice.
‚ 7 ƒ
5. Press + +
ming.

Using the Chime Feature

Turning on the Chime feature is like having bells on
every protected door and window.
The Chime feature works only in Level 1—OFF.
Whenever anyone enters or exits a protected door,
sirens and speakers emit 2 beeps that let you know
someone has entered or exited the premises.
To turn Chime on/off:
• From any touchpad, press
While the Chime feature is on, the display on
alphanumeric touchpads includes,
"CHIME IS ON."

Adjusting the Volume of the Wireless Siren

1
2
1
to
to exit User Program-
the outlet.
In addition to Police, Fire, and Auxiliary alarms, the
wireless siren will sound trouble beeps in the event
of a trouble condition anywhere in the system, and
emit arming status beeps during Entry and Exit
Delay periods.
The wireless siren has five volume levels from 0
(silent) to 4 (loudest). All alarms sound at the loud-
est level, regardless of the volume setting.
7 1
+ .

Adjusting the Touchpad Display Brightness

You may want to change the brightness of a touch-
pad display based on its location in a building or
room. For example, dim the touchpad display in a
bedroom or enhance a display near a window.
Changing the touchpad display affects only the
touchpad currently being used.
(Not investigated by UL) Your system
may include a wireless siren that may be
supervised or unsupervised.
The system can supervise the state of the
siren to make sure that it is plugged into
To change the volume of the wireless siren:
1. Hold down the button on the front of the
siren for ten seconds until it beeps, then
release it.
The siren responds by beeping once, indicat-
ing it has entered change volume mode.
2. To increase the volume by one level, press
the siren button for one second until it beeps.
Repeat until the volume reaches the desired
level.
3. After the highest level, the siren sounds one
long beep, followed by 4 short beeps to sig-
nal the silent level. It then cycles through the
levels again.
17