8
Arming Level 2—STAY
There are times when you want intrusion protec-
tion, but still want the freedom to move around
within your house without setting off an alarm. For
example, in the evening when your family is inside
for the night. In this and similar situations, set your
system to 2—STAY.
To arm to Level 2—STAY using a touchpad:
1. Close all protected perimeter doors and win-
dows.
2. Press
• Alphanumeric touchpads display,
• On LED touchpads, Enter Code blinks.
3. Enter your access code.
• Alphanumeric touchpads display,
• On LED touchpads, STAY lights up:
4. The system sounds two short beeps.
5. If leaving the premises, exit through a desig-
nated delay door immediately.
To arm to Level 2—STAY using a keychain
touchpad:
•
Press the Lock button
2
—STAY at any touchpad.
"ENTER CODE."
"ARMED TO STAY."
2
3
1
STAY
AWAY
6
7
5
ALARM -
Both Flashing
Enter Code
NO DELAY
þ
þ
þ
• or to arm directly to Level 3 with no
Exit or Entry delay.
Arming Level 3—AWAY
At other times, you want every sensor to be alert:
when the family goes on vacation, or at closing
time.
In this and similar situations, set your system to
3—AWAY for maximum protection. All sensors are
active—perimeter door and window sensors, and
interior motion detectors.
Bypass
Trouble
To arm to Level 3—AWAY using a touchpad:
Check
1. Close all perimeter doors and windows.
Status
Power
2. Press
• Alphanumeric touchpads display,
• On LED touchpads, Enter Code blinks.
3. Enter your access code.
• Alphanumeric touchpads display,
• On LED touchpads, AWAY lights up:
4. The system sounds three short beeps.
5. Exit through a designated delay door immedi-
ately.
To arm to Level 3—AWAY using a keychain
touchpad:
Press the Lock button
Level 1 to Level 3, or once to go from Level 2
to Level 3.
Your installer can set up your key-
chain touchpad to either:
• increase the arming level each time
the Lock button is pressed
(Level 1
Level 2, Level 2
3
—AWAY at any touchpad.
"ENTER CODE."
"ARMED TO AWAY."
2
3
1
STAY
AWAY
6
7
5
ALARM -
Both Flashing
Enter Code
NO DELAY
twice to go from
Level 3),
Bypass
Trouble
Check
Status
Power
Need help?
Do you have a question about the CONCORD and is the answer not in the manual?