The high and low settings you enter do not control
heating and cooling systems, but determine the
point at which the furnace or air conditioner is acti-
vated.
Temperature settings can range from 45° to 90°
Fahrenheit.
To set the Energy Saver temperature range from
an alphanumeric touchpad:
1. Enter User Programming by pressing
9
+ System or Partition Master
B
2. Press
until the touchpad displays
"ENERGY SAVER," then press
3. Enter the lowest allowable temperature
before the furnace turns on. For example,
"LOW SETPOINT 50 DEGREES F."
ƒ
4. Press
to secure your choice.
B
5. Press
. Enter the highest allowable temper-
ature before the air conditioner turns on.
ƒ
6. Press
to secure your choice.
‚
7
ƒ
7. Press
+
+
ming.
Turning Energy Saver On and Off
To override your normal heating or air conditioning
settings, turn the Energy Saver feature on. When
you are ready to return to your normal temperature
control settings, turn Energy Saver off.
CODE
.
ƒ
.
to exit User Program-
To set the Energy Saver temperature range from
an LED touchpad:
1. Enter User Programming by pressing
9
+ System or Partition Master
‚
6
0
2. Press
+
+
3. Enter the lowest allowable temperature
before the furnace turns on, then press
secure your choice.
‚
6
1
4. Press
+
+
5. Enter the highest allowable temperature
before the air conditioner turns on, then
ƒ
press
to secure your choice.
‚
7
ƒ
6. Press
+
+
ming.
To turn Energy Saver on/off:
From any touchpad, press 7 + 2.
•
Alphanumeric touchpads display,
"ENERGY SAVER IS ON," for example.
CODE
.
.
ƒ
to
.
to exit User Program-
19
Need help?
Do you have a question about the CONCORD and is the answer not in the manual?