Lcd Functions - Ducati MONSTER S2R 1000 Use And Maintenance Manual

LCD functions

OFF
When the engine is switched on (key turned from OFF to ON),
the instrument panel checks all instruments (dials, display,
warning lights), see (fig. 5 and fig. 6).
Km/h
LCD unit functions (1)
By pressing button (A, fig. 6) with the key turned to ON,
you can cycle between display of the trip counter and the
E
odometer and, if the fuel level warning light is on, the fuel
-1
min x1000
reserve trip counter.
Resetting the trip meter
If button (A, fig. 6) is held pressed for more than 2 seconds
while the TRIP (trip meter) is active, the display is reset
(LCD 1).
fig. 5
LCD unit functions (2)
If button (B, fig. 6) is pressed with the ignition key at ON, CHECK
the display shows the clock and the oil temperature.
Setting the clock
Press (B, fig. 6) for at least 2 seconds and the time will be
shown in display (b, fig. 4.2).
Select AM/PM by pressing button (A, fig. 6). Press button (B)
to select the hour setting function. Press (A) repeatedly to
change the hour indication. Press button (B) to change to
the minute setting function.
Press button (A) to increase the minutes; hold the button
pressed for more than 5 seconds to increase the rate of
change. Press button (B) to exit the clock setting function.
2
1
A B
fig. 6
13