Lcd Unit Functions - Ducati SUPERBIKE 848 EVO Owner's Manual

LCD unit functions

Warning
Any adjustments to the instrument panel must only be
carried out when the motorcycle is stationary. Never operate
the instrument panel controls while riding the motorcycle.
1) SPEEDOMETER.
Gives road speed.
2) ODOMETER.
Shows total distance travelled.
3) TRIP METER.
Indicates distance covered since the meters (TRIP A and
TRIP B) were last reset.
4) TRIP FUEL METER.
Shows distance travelled on reserve fuel.
5) CLOCK.
6) LAP TIMER.
7) ENGINE RPM INDICATOR (RPM).
8) LAP TIME, MAXIMUM SPEED AND MAXIMUM RPM
RECORDING (LAP).
9) BATTERY VOLTAGE INDICATOR (BATT).
10) AIR TEMPERATURE INDICATOR.
11) WATER TEMPERATURE INDICATOR.
Indicates engine coolant temperature.
Important
Stop riding if the temperature reaches the maximum
value, otherwise the engine might be damaged.
12) SERVICE WARNING (SERV).
5
7
2 3 4 1 6
The "SERV" message indicates that the vehicle has covered
the distance corresponding to a Scheduled Maintenance
interval. The message is displayed only at Key-On for 5
seconds. The service indicator will be reset at an authorised
Ducati Service Centre during servicing.
Important
The instrument panel incorporates diagnostic functions
for the electronic injection/ignition system. Never use the
menus reserved for trained personnel for any reason. If this
function is accidentally accessed, turn the key to OFF and
contact a Ducati Dealer or Authorised Service Centre for the
necessary checks.
9
10
11
12
8
fig. 6
13
E