Replacing Bulbs - Ducati MONSTER S2R 1000 Use And Maintenance Manual

Replacing bulbs

Before replacing a burnt-out bulb, make sure that the new
one complies with voltage and wattage as specified in
the "Electrical System" paragraph on page 78.
(fig. 48 - fig. 49 - fig. 50 - fig. 51)
Headlight
To carry out maintenance on the headlight, it is advisable to
remove the headlight fairing as described in the paragraph
E
"Removing the headlight shell" on page 46.
To access the headlight bulbs, loosen the lower screw (1)
that attaches the lens/reflector assembly to the shell.
Disconnect the wiring connector (2, fig. 49) from the
headlight bulb. Release the bulb retaining clip (3, fig. 49)
and remove the bulb from its housing.
56
1
3
fig. 48
2
fig. 49