Adjusting The Position Of The Gearchange Pedal - Ducati MONSTER S2R 1000 Use And Maintenance Manual

Adjusting the position of the gearchange
pedal
(fig. 16)
The position of the gearchange pedal relative to the footrest
can be adjusted to suit the requirements of the rider.
To adjust the position, proceed as follows:
Hold the rod (1) using an open-ended wrench (2) and
slacken off the locknuts (3) and (4).
Notes
The locknut (4) has a left-hand thread.
Turn the rod (1) and move the pedal to the required position.
Tighten both nuts against the rod.
3 1 2
E
4
fig. 16
25