Transmission - Ducati HYPERMOTARD 1100 S Owner's Manual

Transmission

Clutch housing and plates totally manufactured from special
aluminium alloy.
Wet clutch operated by a control lever on handlebar left side.
Drive is transmitted from engine to gearbox main shaft via
spur gears.
Front chain sprocket/clutch gearwheel ratio:
32/59
E
6-speed gearbox with constant mesh gears, gear change
pedal on left side of motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
15/42
Total gear ratios:
st
1 gear 15/37
nd
2 gear 17/30
rd
3 gear 20/27
th
4 gear 22/24
th
5 gear 24/23
th
6 gear 28/24
98
Drive chain from gearbox to rear wheel:
Make:
DID
Type:
525 HV2
Dimensions:
5/8"x5/16"
Number of links:
104
Important
The above gear ratios are part of the homologated
specifications and under no circumstances must they be
modified.
If you wish to tune up your motorcycle for competitive trials,
you may refer to Ducati Motor Holding S.p.A. who will be
glad to provide information about the special ratios available.
Relevant instructions and original spare parts are available
from your local Dealer or Authorised Workshop.
Warning
If the rear chain sprocket needs replacing, contact a
Ducati Dealer or an Authorised Workshop. If improperly
replaced, this component could seriously endanger your
safety and that of your passenger, and cause irreparable
damage to your motorcycle.