Cleaning The Motorcycle - Ducati HYPERMOTARD 1100 S Owner's Manual

Cleaning the motorcycle

To preserve the finish of metal parts and paintwork, wash
and clean your motorcycle at regular intervals, anyway
according to the road conditions you ride in. Use specific
products only. Prefer biodegradable products. Avoid
aggressive detergents or solvents.
Important
E
Do not wash your motorcycle right after use. When the
motorcycle is still hot, water drops will evaporate faster and
spot hot surfaces. Never clean the motorcycle using hot or
high-pressure water jets. Cleaning the motorcycle with
water cleaners may lead to seizure or severe failure of front
fork, wheel hub assembly, electric system, front fork seals,
air inlets or exhaust silencers and adversely affect the
operation of motorcycle safety features.
Clean off stubborn dirt or exceeding grease from engine
parts using a degreasing agent. Be sure to avoid contact with
drive parts (chain, sprockets, etc.). Rinse with warm water
and dry all surfaces with chamois leather.
88
Warning
Braking performance may be impaired immediately
after washing the motorcycle. Never grease or lubricate the
brake discs. Loss of braking and further accidents may occur.
Clean the discs with an oil-free solvent.