Table of Contents
Advertisement
This will be your starting point. Now turn the adjuster counter
clockwise and listen for the clicks that identify setting
positions no. 1, 2 and so on.
STANDARD factory setting is as follows:
1100S
compression:
6 clicks from fully closed position;
rebound:
11 clicks from fully closed position;
E
Spring preload:
12 mm (fully loosened and then 7 turns).
To change the preload of the spring inside each fork leg, turn
the hex. adjuster (2, fig. 40) with a 22-mm hexagon wrench.
1100
compression:
1.5 turns ± 1/4 of a turn;
rebound:
1.5 turns ± 1/4 of a turn;
Spring preload:
10 mm (fully loosened and then 3 turns).
To change the preload of the spring inside each fork leg, turn
the hex. adjuster (2, fig. 40) with a 22-mm hexagon wrench.
Important
Adjust both fork legs to same settings.
54
3
fig. 41
Hide quick links:
Advertisement
Table of Contents
