Ducati HYPERMOTARD 1100 S Owner's Manual page 28

Stored data display (LAP Memory)
Displays data stored using the LAP function: lap number and
lap time.
To view stored lap times, enter the menu and go to page
"LAP MEM".
In this menu page, press button (1, fig. 8) in position B "▼"
to view the "1st lap"; the display will show lap number and lap
time.
Press button (1, fig. 8) in position B "▼" repeatedly to scroll
through the 30 laps stored until returning to the 1st lap.
If button (1, fig. 8) is hold depressed in position B "▼" for 3
seconds while viewing lap times, the display will instantly
reset all stored lap times and the LAP function is disabled
automatically if active.
To exit the stored lap time display mode, press button (1, fig.
8) in position A "▲".
If no lap is stored in the memory, the display will scroll
through 30 laps with all lap times reading "00.00.00".
If the engine reached the limiter threshold during a lap, the
corresponding light (10, fig. 4) comes on while viewing
stored lap times.
B
A
B (x 29 times)
A
(x 3 sec)
B
A
(x 29 times)
B
A
E
B
B
fig. 19
27