Adjusting the position of the gearchange
1
3
4
and rear brake pedals
The position of the gearchange and rear brake pedals in
relation to the footrests can be adjusted to suit the
requirements of the rider.
Proceed as follows to change the pedal position:
(fig. 23)
Gearchange pedal
E
Use an open ended spanner to hold the rod (1) on the flat (2)
and slacken off lock nut (3).
2
Turn the screw (4) to detach the rod (1) from the gearchange
lever.
Turn the rod (1) by means of the flat (2) and move the
pedal to the required position.
fig. 23
Tighten the screw (4) to secure the gearchange lever to
the rod (1).
Tighten the lock nut (3) against the rod (1).
32