Brakes - Ducati MULTISTRADA 1100 S Use And Maintenance Manual

Brakes

Front
With double semi-floating drilled disc.
Flange material:
steel.
Braking surface material:
steel.
Disc diameter:
320 mm.
Hydraulically operated by a control lever on right handlebar.
Braking surface:
2
88 cm .
Make of brake callipers:
BREMBO
Type:
30/34 - 4 pistons.
Friction material:
FERIT I/D 450FP
Master cylinder type:
PSC16 with built-in reservoir.
Rear
With fixed drilled steel disc.
Flange material:
steel.
Braking surface material:
steel.
Disc diameter:
245 mm.
Hydraulically operated by pedal on R.H. side.
Braking surface:
2
32 cm .
Make:
BREMBO
Type:
34 -2 pistons
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11B.
Warning
The brake fluid used in the brake system is corrosive.
In the event of accidental contact with eyes or skin, wash the
affected area with copious amounts of running water.
E
93