Rear brake pedal
Push down on the pedal (1) with your foot to operate the
rear brake.
The brake system is hydraulic and very little force is
required to operate it.
Gearchange pedal
The gear change pedal is at rest when in centre position N,
and automatically returns to the centre position. When in this
position, light N (8, fig. 6) on instrument panel comes on.
The pedal can be moved:
down = push down on the pedal to engage 1
shift down. The N light on the instrument panel goes out.
up = lift the pedal to engage 2
th
6
gear.
Each time you move the pedal, you engage the next gear.
(fig. 21)
(fig. 22)
st
gear and to
nd
rd
th
gear, then 3
, 4
, 5
6
5
4
3
2
th
and
N
1
E
1
fig. 21
fig. 22
31