Table of Contents
Advertisement
6) Turn indicator light
Flashes when a turn signal is on.
7) Engine oil pressure light
Illuminates when engine oil pressure is too low. This light
must illuminate when ignition is switched to ON and must
go out a few seconds after the engine starts. It may
illuminate briefly when the engine is very hot, however
E
it should go out as the engine revs up.
Important
If this light (7) stays on, stop the engine or it may be
severely damaged.
8) Neutral light (green).
Illuminates when the gearbox is in neutral.
9) High beam warning light
Comes on when high beam is on.
10) EOBD light
(amber).
Comes on when there are about 3 litres of fuel left in the
tank.
11) Fuel display.
This function shows the fuel level in the motorcycle fuel tank.
When the last segment remains lit (flashing) the low fuel
light (10) will illuminate.
14
(green).
(red).
(blue)
1
12
11
10
9
12) Service indicator.
The indicator (
) illuminates to signal when a service is due.
The indicator continues to flash for 50 km (31 mi) after the
ignition has been switched on. After this the indicator will be
steadily illuminated. When the indicator starts flashing,
contact your dealer or authorised service centre.
2
3
4
8
7
6
5
fig. 6
Hide quick links:
Advertisement
Table of Contents
