Hob - Daily Use; Setting The Time; Hob Control Panel - AEG 41102IU-MN User Manual

4.3 Setting the time

You must set the time before you
operate the oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time of Day function
flashes.
Press the
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day.
To change the time, press
again until the indicator for the Time of
Day function flashes.

5. HOB - DAILY USE

WARNING!
Refer to Safety chapters.

5.1 Hob control panel

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
Sensor
field
1 -
-
2
3 -
4
or to set the correct
again and
1
8
Function
Heat setting display
Timer indicators of cooking
zones
Timer display
-
4.4 Preheating
Preheat the empty appliance before first
use.
Preheat the two ovens. Heat
up one oven at a time.
1. Set the maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
4. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow is sufficient.
2 3
7
Comment
To show the heat setting.
To show for which zone you set the time.
To show the time in minutes.
To select the cooking zone.
ENGLISH
.
4
5
6
9