Electrolux EOB53202 User Manual page 16

16 electrolux
7. Put the door on a soft cloth on a stable
surface.
8. Release the locking system to remove
the internal panel of glass.
9. Turn the two fasteners by 90° and re-
move them from their seats.
10. Carefully lift (step 1) and remove (step
2) the panel of glass.
Clean the glass panel with water and soap.
Dry the glass panel carefully.
Installing the door and the glass panel
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
When you install the panel with a decorative
frame, make sure that the screen-printing
zone looks to the inner side of the door.
Make sure that after the installation the sur-
face of the glass panel frame on the
screen-printing zones is not rough when
you touch it.
Make sure that you install the internal panel
of glass in the seats correctly (refer to the il-
lustration).
Stainless steel or aluminium appli-
ances:
Clean the oven door with a wet sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abra-
sive materials as they can damage the
oven surface. Clean the oven control
panel with the same precautions