Electrolux EOB53202 User Manual page 14

14 electrolux
• To clean metal surfaces use a usual
cleaning agent
• Clean the oven interior after each use.
Thus you can remove dirt more easily
and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft
cloth with warm water and cleaning
agent) after each use and let them dry.
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It
can destroy nonstick coating!
Cleaning the door gasket
• Regularly do a check of the door gasket.
The door gasket is around the frame of
the oven cavity. Do not use the appliance
if the door gasket is damaged. Contact
the Service Centre.
• To clean the door gasket refer to the
general information about the cleaning.
Oven lamp
Warning! Be careful! There is the risk
of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.
Put a cloth on the bottom of the oven
for protection of the oven light and
glass cover.
1. Turn the glass cover anti-clockwise to
remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with appli-
cable 300°C heat-resistant oven light
bulb.
Use the same oven lamp type.
4. Install the glass cover.
Shelf support rails
You can remove the shelf support rails to
clean the side walls.
Removing the shelf support rails
1. Pull the front of the shelf runners away
from the side wall.
2. Pull the shelf runners from the back of
the side wall to remove the shelf sup-
port rails.
1
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
Important! Make sure that the retaining
pins on the telescopic shelf runners point to
the front.
Cleaning the oven door
The oven door has two panels of glass. You
can remove the oven door and the internal
panel of glass to clean it.
Removing the oven door and the glass
panel
1. Fully open the door and identify the
hinge to the left side of the door.
2