Service Symbol And Error Codes - AEG COMPETENCE B8920 Operating And Installation Instructions

Operating Instructions
:
Caution! Do not use the appliance if damaged. In the event of a fault
or failure, switch off at the mains /fuse box or take out the fuses.
In the event of a fault, visits by technicians from Customer Service or
dealer may not be covered by guarantee, even during the warranty pe-
riod.

Service Symbol and Error Codes

Any faults in the electronic control system are indicated by Ç on the
display field, and an error code replaces the temperature display.
• Switch off the circuit-breaker.
• Switch on again after several minutes.
• Switch on the oven again.
• If the Ç symbol appears again, call Customer Service and give the
model number (see Chapter "Service") and Error Code, for example,
"001".
Cooling continues to operate for safety reasons. If necessary, switch off
3
the appliance at the circuit-breaker again.
68