Clock Functions - AEG COMPETENCE B8920 Operating And Installation Instructions

Operating Instructions

Clock Functions

Countdown C
To set a countdown. A signal sounds after the time has elapsed.
This function does not affect the functioning of the oven.
Cook time <
To set how long the oven is to be in use.
End time >
To set when the oven is to switch off again.
Time D
To set, change or check the time.
(See also section "Before Using for the First Time".)
General Tips
3
• After a Clock function has been selected, the clock display flashes for
about 4 seconds. While it flashes, the desired time can be set using
the i or j buttons.
• When the desired time has been set, the display flashes again for
around 4 seconds. The function concerned is then lit. The set time be-
gins to run.
• Press any of the Clock function buttons to stop the audible signal.
22