AEG COMPETENCE B8920 Operating And Installation Instructions page 66

Operating Instructions
Replacing the oven side light bulb/cleaning the glass cap
1. Take out the side rails.
2. Unscrew the metal frame using a
cross-tip screwdriver.
3. Take off the metal frame and seal,
and clean.
4. If necessary:
replace bulb with a 25 Watt,
230 V, 300 °C heat-resistant oven
light bulb.
5. Put the metal frame and seal back
in place, insert screws, and tighten.
6. Replace the side rails.
66