AEG COMPETENCE B8920 Operating And Installation Instructions page 21

5. You can change the core temperature to the desired setting using the
i or j buttons.
After about 5 seconds, on the right of the time display appears the cur-
rent core temperature of the roast.
The core temperature is displayed starting from 30°C.
3
Checking or changing the core temperature
• Press the MEAT PROBE Ê button to show the set core temperature.
• Press the MEAT PROBE Ê button, and then press the i or j button
several times to adjust the selected core temperature.
When the core temperature detected reaches the selected core tem-
perature, an audible signal is sounded and the function display flashes.
The heating is switched off automatically.
6. Stop the signal by pressing the i or j button.
Switch off the oven with the OFF I button.
Caution! The meat probe becomes
1
very hot. Be careful when taking
out the plug and extracting the
meat probe!
7. Remove the meat probe plug from
the socket, and take the meat out of
the oven with the meat probe still
inserted.
After 2 minutes, the appliance
3
switches off automatically.
Operating Instructions
21